Getting started with Zepp.

Choose Your Sport

Step 1

Charge your Zepp Sensor

For best performance, the Zepp Baseball sensor is recommended to be fully charged prior to use. A full charge cycle may take up to 2.5 hours.

Step 2

Download Zepp Baseball and Create Account

  1. Download the free Zepp Baseball app from the App Store (for Apple devices) or Google Play (for Android devices).

  2. Once downloaded, open the Zepp Baseball app and select Get Started to create an account.

  3. Select one of the respective options: Use Zepp Sensor, Learn from the Pros or Record your swing.

  4. Setup your Zepp account either using Facebook or an email address. Creating a specific account for yourself will allow you to view swing data on any mobile device compatible with Zepp Baseball.

Questions on Compatibility? Click Here >

Step 3

Meet your sensor

Watch the video

Controls & Indicators

  •   Power On
    Hold Multi-Function button in from the side toward the LED channel for 4 seconds
  •   Power Off
    Power Off – Hold Multi-Function button in from the side toward the LED channel for 4 seconds
  •   Reconnect Sensor
    Reconnect Sensor - Press Multi-Function button twice
  •   Low Battery Indicator
    Low Battery Indicator – Press Multi-Function button once. Three LED’s lit with one light blinking or less indicates low battery When the sensor has low battery, there will be a low battery indicator in the app located on the calibration icon as shown below.

  • Favorite A Swing
    Press Multi-Function button once within 10 seconds of capturing a swing.

Sensor Usage

  • Sensor will enter a sleep mode after 5 minutes of non-use. Double click Multi-Function button to wake sensor up.
  • Up to 5.5 hours continuous swing recording on a full charge (varies by use).

Step 4

Pair and Connect

  1. Power Zepp sensor on by holding Multi-Function button in from the side toward the LED channel for 4 seconds.
  2. Grab your smartphone or tablet and turn on Bluetooth located in your mobile device’s settings.
  3. In Bluetooth Settings, select “ZEPP - XX” and allow 10-15 seconds for the sensor to pair. If prompted to enter a PIN to successfully pair, simply press "OK" or "Accept" and continue. No PIN is required to pair the Zepp Sensor.

Once paired, your smartphone or tablet will indicate the Zepp sensor as “Paired” or “Connected.” The pairing process listed above is only required the first time you connect your sensor to your mobile device as the sensor will automatically once it has been paired.

If you wish to pair the Zepp sensor to another mobile device, you must first un-pair the sensor from the original device as it can only be paired to one device at a time.

Having trouble? Get Assistance

Step 5

Mount your Sensor

Watch the video

Attach the mount to the bottom of your bat handle and insert the Zepp sensor.

Step 6

Take a Swing
making Contact with a Ball!

  • With the sensor powered on, open the Zepp Baseball app. You will see a yellow sensor icon in the top of the app blinking. This indicates the sensor is connecting to the app and may take up to 10-15 seconds to connect. Once connected, the icon will become solid yellow.
  • Once connected you will be asked to calibrate the device. When calibrating, be sure to hold the sensor still in your batting stance as shown in the calibration screen. If you are not prompted to calibrate, select the yellow sensor icon located in the top of the Home Screen to initiate calibration process.
  • Take a swing and make contact with a ball. With each swing your swing results will automatically be displayed in the app.
  • We recommend calibrating the sensor once prior to a swing session.
  • Select “Capture Your First Swing Now” or “Swing Now” located near the top of the home screen to open the 3D view. This is the main swing screen of Zepp Baseball.
  • Select the bat you wish to use using the bat selector option located next to the calibration icon within the 3D view.
    Once your bat is selected, step up to the plate and swing making contact with a ball! All swings where contact is made with a ball will automatically be captured and saved locally to your mobile device.
    If your mobile device is also connected to the internet via Wi-Fi or cellular data, all swing information will be backed up to our servers. This allows you to view swing data from any compatible mobile device and prevents the loss of swing information.
    Click Here for more information on how to block the Zepp Baseball app from using cellular data when uploading swings to the cloud.

Step 1

Charge your Zepp Sensor

For best performance, the Zepp Baseball sensor is recommended to be fully charged prior to use. A full charge cycle may take up to 2.5 hours.

Step 2

Download Zepp Golf and Create Account

  • Download the free Zepp Golf app from the App Store (for Apple devices) or Google Play (for Android devices).

  • Once downloaded, open the Zepp Golf app and select Get Started to create an account.

  • Select one of the respective options: Use Zepp Sensor, Learn from the Pros or Record your swing.

  • Setup your Zepp account either using Facebook or an email address. Creating a specific account for yourself will allow you to view swing data on any mobile device compatible with Zepp Golf.

Questions on Compatibility? Click Here >

Step 3

Meet your sensor

Watch the video

Controls & Indicators

  •   Power On
    Hold Multi-Function button in from the side toward the LED channel for 4 seconds
  •   Power Off
    Hold Multi-Function button in from the side toward the LED channel for 4 seconds
  •   Reconnect Sensor
    Multi-Function button twice
  •   Low Battery Indicator
    Press Multi-Function button once. Three LED’s lit with one light blinking or less indicates low battery When the sensor has low battery, there will be a low battery indicator in the app located on the calibration icon as shown below.

  • Favorite A Swing
    Press Multi-Function button once within 10 seconds of capturing a swing.

Sensor Usage

  • Sensor will enter a sleep mode after 5 minutes of non-use. Double click Multi-Function button to wake sensor up.
  • Up to 5.5 hours continuous swing recording on a full charge (varies by use)

Step 4

Pair and Connect

  1. Power Zepp sensor on by holding Multi-Function button in from the side toward the LED channel for 4 seconds 
  2. Grab your smartphone or tablet and turn on Bluetooth located in your mobile device’s settings.
  3. In Bluetooth Settings, select “ZEPP - XX” and allow 10-15 seconds for the sensor to pair. If prompted to enter a PIN to successfully pair, simply press "OK" or "Accept" and continue. No PIN is required to pair the Zepp Sensor.

Once paired, your smartphone or tablet will indicate the Zepp sensor as “Paired” or “Connected.” The pairing process listed above is only required the first time you connect your sensor to your mobile device as the sensor will automatically once it has been paired.

If you wish to pair the Zepp sensor to another mobile device, you must first un-pair the sensor from the original device as it can only be paired to one device at a time.

Having trouble? Get Assistance

Step 5

Mount your Sensor

Watch the video

Attach the mount to your velcro glove strap and insert the sensor with the button pointing toward you body so that you can easily press the button.

Step 6

Take a Swing

  • With the sensor powered on, open the Zepp Golf app. You will see a yellow sensor icon in the top of the app blinking. This indicates the sensor is connecting to the app and may take up to 10-15 seconds to connect. Once connected, the icon will become solid yellow.
  • Once connected you will be asked to calibrate the device. When calibrating, be sure to hold the sensor still while standing upright. If you are not prompted to calibrate, select the yellow sensor icon located in the top of the home screen to initiate calibration process.
  • We recommend calibrating the sensor once prior to a swing session.
  • Select “Capture Your First Swing Now” or “Swing Now” located near the top of the home screen to open the 3D view. This is the main swing screen of Zepp Golf.
  • Select the club you are going to use using the club selector icon located next to the calibration icon within the 3D view.
    Once your club is selected, swing! All swings will automatically be captured and saved locally to your mobile device.
    If your mobile device is also connected to the internet via Wi-Fi or cellular data, all swing information will be backed up to our servers. This allows you to view swing data from any compatible mobile device and prevents the loss of swing information.
    Click Here for more information on how to block the Zepp Golf app from using cellular data when uploading swings to the cloud.

Step 1

Download and setup app

Download the free Zepp Tennis app from the App Store (for Apple devices) or Google Play (for Android devices).

Step 2

Meet your sensor

Watch the video

Controls & Indicators

  • Power On/Off
    Press in from the side towards the LED channel and hold 4s
  • Reconnect Sensor
    Press 2x
  • Star A Swing
    Press 1x within 10 seconds of swing
  • Low Battery Indicator
    Press 1x. Two blinking LEDs or less equals low battery.

Battery

  • Up to 5.5 hours continuous swing recording (varies by use)
  • Sensor enters sleep mode after 5 minutes of non-use. Press 1x to turn back on.

Charging

  • Up to 2.5 hours for a full charge cycle
  • Note: Sensor performs best when charged before each use.

Step 3

Pair and Connect

  1. Grab your smartphone or tablet and turn on Bluetooth (Settings > Bluetooth).
  2. Turn on your sensor. It will automatically enter pairing mode when turned on for the first time. To manually enter pairing mode or reconnect with a paired device, press the button 2x.
  3. Wait for your device to detect your Zepp Sensor and then select it in the Bluetooth menu to pair and connect.
  4. If prompted to enter a PIN to successfully pair, simply press "OK" or "Accept" and continue. No PIN is required to pair the Zepp Sensor.
Having trouble? Get Assistance

Step 4

Mount your Sensor

Watch the video

Flex Mount Start by aligning the octagon shape of the mount with the octagon shape of your tennis racket handle. Stretch the mount over the bottom of the handle so the shapes are aligned, and pull the mount tight over the handle. To insert the sensor, find the Zepp logo and the two small protruding vertical tabs on two of the corners of the mount near the logo area. Align the sensor button with one of these tabs (either one) and insert the sensor into the mount with LEDs facing outward.

Pro Mount Start by aligning the octagon shape of the mount with the octagon shape of your tennis racket handle. Remove the tape from the bottom of the mount and press firmly to apply. Allow 24 hours for adhesive to set prior to use. To insert the sensor, align the LED channel with the logo on the mount and insert the sensor into the mount with LEDs facing outward.

Step 5

Capture a Serve or Track a Match

  • For best results, calibrate your sensor by tapping the yellow sensor icon in the upper right corner of the app.
  • Toss a ball and make a serve. Your results will automatically be displayed in the app.
  • For information on how to track a match click here